|
Additional equipment:
- Electrovalve for clean water
- 15kW Main engine
Requirements to be executed (before starting the machine) by Customer:
- electric supply cable: 5 x 6 [mm2] stranded copper conductor
- protection in electric network before machine: D32-3P
- electric connection between the machine and the network should be disconnectable - plug/socket 32A
- before start, all fixed, metal parts shall be connected by means of band iron of section 120 mm2 with PE of electric installation
- all media (electricity, water, compressed air) shall be led from the side of control cabinet
|
Automatic surface grinder, single head, intended for grinding and polishing of stone slabs
- pneumatic press
- longitudinal and transverse feed based on inverters
- 6 programs / operating modes
- movement along the edge of the slab - the adjusting movement
- movement along the edge of the slab
- movement along the slab (left to right)
- movement across the slab
- alternating movement (one cycle, this: movement along the slab and the next athwart)
- zigzag movement
- programming the number of cycles
|
| Power supply |
3/N/PE ~400 V; 12.5 kW |
| Main engine |
11 kW |
| Compressed air |
0.5 MPa |
| Polishing head |
450 mm, 6 fields |
| Longitudinal feed |
3300 mm |
| Transverse feed |
2200 mm |
| Dimensions |
4000 x 3000 x 1400 mm
(length x width x height) |
Attention: The polishing head is not included.
We provide assembly, commissioning, warranty 12 months and after-sales service
|
Profile side grinder
Automatic surface grinder